Canon LV-7225 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 27

Computer Input Input Source Selection Direct Operation Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer 2 ✳ Video Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 2 Press the Point d button to move the red arrow pointer to either Computer 1 or Computer 2, and then press the SET button. 3 After the Source Select Menu appears for Computer 1, move the pointer to RGB and then press the SET button. RGB (Analog) When the input source is analog coming from a computer through the DVI terminal, select RGB (Analog). RGB (PC Digital) When the input source is digital coming from a computer through the DVI terminal, select RGB (PC Digital) RGB (AV HDCP) When the input source compatible with HDCP is coming from video equipment through the DVI terminal, select RGB (AV HDCP). RGB When the input source is analog coming from a computer through the RGB IN-2/ COMPONENT IN/ RGB OUT terminal, select RGB. ✔Note: • Computer 2 is not displayed when the RGB IN-2/ COMPONENT IN/ RGB OUT terminal is set as Monitor out. (p44) • HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. COMPUTER button Computer 1 Computer 2 ✳ ✳ See Note on the bottom of this page. Input Menu icon Input Menu Move the pointer (red arrow) to Computer 1 and press the SET button. ✳ See Note on the bottom of this page. Computer 1 Input Menu Source Select Menu Move the pointer to RGB(Analog), RGB (PC Digital), or RGB(AV HDCP) and press the SET button. Move the pointer (red arrow) to Computer 2 and press the SET button. Computer 2 Source Select Menu Move the pointer to RGB and press the SET button. Computer Input 27