Canon LV-7225 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 45
Lamp mode, Power management, On start, Standby mode
UPC - 013803046021
View all Canon LV-7225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting Setting Standby mode This function is available when using Multi Card Imager optionally supplied, and it reduces standby energy when selecting Eco. Eco ···· reduces standby energy. Normal ···· consumes normal standby energy. Standby mode Power management For reducing power consumption as well as maintaining the lamp life, the Power Management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more. If the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message "No signal" appears on the screen. The count-down of the set time will get started. The count-down time can be set between 1 and 30 minutes. When the count-down time has been elapsed, the lamp will be turned off to cool itself down. The POWER indicator is blinking red during this cooling-off period. The next operation depends on the setting as follows : Ready . . . . . .When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control unit is pressed. Shutdown . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector is automatically turned on just by connecting the AC power cord to a wall outlet. ✔Note: Be sure to turn the projector off properly (see "Turning Off the Projector" on page 21). If the projector is turned off in the wrong steps, the On start function does not operate properly. Press the SET button at this icon to display other items. Power management Time left until Lamp off Press the SET button at Power management and this box appears. Choose one of three settings with the Point 7 8 button, and go to the timer with the Point ed button and set time with the Point 7 8 button. Lamp mode This function allows you to change brightness of the screen. Normal mode ···· normal brightness Auto mode ···· brightness according with the input signal Silent mode ···· lower brightness reduces the lamp power consumption and extends the lamp life. The sound is quiet. 45