Canon LV-7225 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 47

Setting Setting PIN code lock This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options. Off the projector is unlocked with the PIN code. On1 requires to enter the PIN code every time turning on the projector. On2...........requires to enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without the PIN code. Whenever to change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. "1234" is set as the initial PIN code at the factory. Enter a PIN code Select a number by pressing the Point 7 8 button and fix the number with the SET button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SET button so that you can change the following PIN code lock settings. If you entered a wrong PIN code, "PIN code" and the number will turn red and disappear. Enter a correct PIN code all over again. To Change the PIN code lock setting Select Off, On1, or On2 with the Point 7 8 button and then "Quit" with the Point d button and press the SET button to close the dialog box. To Change the PIN code The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point d button, and press the SET button. The New PIN code input dialog box will appear. Select a number with the Point 7 8 button and fix the number with the SET button. Repeat it to complete entering a four-digit number. When the four-digit number is fixed, the pointer will automatically move to "Set". Then press the SET button. Be sure to note the new PIN code and keep it at hand. ✔Note: If you forget your PIN code and unable to change it, the PIN code can be reset to the factory default setting (1234) according to the following procedures. When you reset the PIN code, the Logo PIN code and Key lock will be reset, as well. 1. Disconnect the AC Power Cord from the AC outlet. 2. As pressing the SET button on the projector, connect the AC Power Cord into an AC outlet again. Keep pressing the SET button until the POWER indicator lights. The PIN code will be returned to the factory default setting while the PIN code lock state will remain the same as previous set state. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Enter a PIN code Pointer Quit The input numbers change to "✳" for security. When the pointer automatically move to "Set", press the SET button. Change the PIN code lock setting Select a desired setting with the Point 7 8 button. Change the PIN code Select PIN code change and press the SET button. The New PIN code input dialog box will appear. The input numbers are being displayed for confirmation. 47