Canon LV-7225 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 46

Setting Pointer You can emphasize a part of the projected image with this function. Choose either Spotlight or Pointer with the Point ed button and press the SET button. Then select one of three different sizes (Large, Middle, and Small) of Spotlight or a pointer of three different patterns (Arrow, Finger, and Dot) of Pointer. (See page 12 for operation.) Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. For example operating the projector in "Code 7", both the projector and the remote control unit must be switched to "Code 7 ". To change the code for the projector; Select a remote control code in this Setting Menu. To change the code for the remote control; While holding down the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector. (See page 14 for details.) Pointer Select Spotlight or Pointer with the Point ed button and press the SET button. Then select size or pattern with the Point 7 8 button. Remote control USB This projector is equipped with the USB port for interactive operation between the projector and computer. Selects either of the followings as needed. ···· When using the remote control unit as the wireless mouse for a computer connected to the projector with a USB cable. (p13, 17) ···· When controlling the projector with a computer. This item is provided for future use. Unavailable now. When pressing the SET button at Remote control unit, the remote control code menu appears. Key lock This function locks operation of the top control and remote control unit. It is useful to prevent operation by an unauthorized person. ···· not locked. ···· locks operation of the top control. To unlock, use the remote control unit. ···· locks operation of the remote control unit. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control unit nearby, disconnect the AC power cord from the AC outlet, and then with pressing the SET button, reinsert the AC power cord. This will cancel the top control lock. Logo PIN code and PIN code will also be canceled. Key lock Select Key lock and this box appears. Choose one of these with the Point ed button and select [Yes] to activate it. 46