Canon LV-7225 Basic_Serial_Command_Codes - Page 19

Basic Serial Command Functional Specification Page 18 of 19 7.3.10. "24" [CR] Status: Processing Cooling down by power save Cooling down by the Power Management function in the Setting menu. The control command is invalid. This Cooling down by Power save moves to Power save after the cooling down time. Status: No signal Response: "00" Cooling Down by Power Save "24" Power Save "04" After 5 minutes with no signal After about 90 seconds 7.3.11. "04" [CR] Status: Power Save The status is Power Save by the Power management function in setting menu. 7.4. Input Mode Read Command Command "CR1" [CR] Detail Get selected Input No. Acceptable "%1" [CR] Response "1" = Computer 1 %1 "2" = Computer 2 "3" = Video Unacceptable "?" [CR] 7.5. Lamp Time Read Command Command "CR3" [CR] Detail Get total lamp running hours. Acceptable "%1" [CR] Response %1 Show as 4 digits Ex.: "0410" [CR] ---- 410 hours Unacceptable "?" [CR] 7.6. Setting Read Command Command "CR4" [CR] Detail Get setting status for screen such as Ceiling / Rear. Acceptable "%1" [CR] Response "11" = Normal Screen Setting %1 "10" = Top and Bottom reversal setting (Rear＆Ceiling On) "01" = Left and Right reversal setting (Rear On) "00" = Top / Bottom and Left / Right reversal setting (Ceiling On) Unacceptable "?" [CR]