Canon LV-7225 Basic_Serial_Command_Codes - Page 20
Temp Read Command
UPC - 013803046021
View all Canon LV-7225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Basic Serial Command Functional Specification Page 19 of 19 7.7. Temp Read Command Command "CR6" [CR] Detail Get the temperature inside a Projector. When some temperature sensors are installed in the Projector, it is possible to know the temperature all at once. Acceptable "%1_%2_%3" [CR] Response %1 = Temperature, sensor 1 %2 = Temperature, sensor 2 %3 = Temperature, sensor 3 Temperature data form shows as 00.0. When the temperature sinks to -, the first character is "-" like "-05.5" [CR]. When cannot return the temperature data due to hardware %1 %2 %3 problems, the first character is "E" like"E00.0" [CR]. When the status is Standby or it is 10 seconds after Power On, depend on Projectors; temperature may approach critical temperature due to ballast lamp's residual heat. So, when the status is Standby or it is 10 seconds after Power On, the process for the abnormal temperature is not executed. The temperature data is " ----" at the time. When some temperature sensors are installed, the Projector sends command continuously. "_31.5__35.2__33.4" [CR] There is the first sensor's information, and after one space, there is the second sensor's information. Unacceptable "?" [CR]