Canon LV-7375 Projector Monitoring Software Ver.1.0.0 User's Manual - Page 23

CHAPTER 3 • Appendix Cause Items in "Discovery settings" are not configured correctly Network settings of the projector and protocol settings of this software are different differently Firewall for an administrative computer is configured Solution •• Confirm the IP address of the projector, and configure the Discovery settings. - If Projector is SNMP-compatible Add a broadcast address of the network with the projector in the "Broadcast" tab, or configure so that the projector's IP address is included in the "IP address ranges" tab of the "Discovery settings" dialog (see pp. 5, 6, 7). In addition, "Protocol name ([SNMP V1]/[SNMP V2c]/[SNMP V3])", "Community name" and "Password" must be configured to match the network settings of the projector to allow communication with the projector. - If Projector is LV Series Compatible Add an IP address of the projector in the "Discovery settings" dialog (see p. 8). •• Configure the discovery settings or protocol settings of this software to match the SNMP settings of the projector. This software cannot communicate with the projector if SNMP version, community name and password do not match. •• Although registration of this software in Windows Firewall is processed during installation, this software may not be able to communicate with the projector if other software such as an anti-virus software is using firewall. Configure the software such as an anti-virus software so that this software can communicate with the projector. See the instruction manual of the software for configuration procedures. ■■ Projector classified into "Warning" Cause Solution Projector is encountering trouble •• For projectors classified into "Warning" of the Projector group list, confirm its status with the properties dialog. See the instruction manual that came with the projector for malfunction details. 23