Canon LV-S4 Owners Manual - Page 25

Computer Input Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector is shown on page 55 ) ✔Note: • The projector may display one of the following messages. Auto When the projector cannot recognize connected signal conforming to PC Systems provided in this projector, the Auto PC Adj. function works to display proper images and the message "Auto" is displayed on the PC System Menu icon. When the image is not projected properly, manual adjustment is required. (p27, 28) PC System Menu The Auto PC Adj. function operates to adjust the projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. (See "Troubleshooting" p50) Mode 1 User preset system manually adjusted in PC Adjustment menu. Adjusted data can be stored in Mode 1 - 5. (p27, 28) SVGA 1 PC system provided in the projector. The projector selects a proper system and displays it. *Mode 1 and SVGA 1 are examples. Selecting Computer System Manually PC system can also be selected manually. 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon. 2 Press the Point d button to move the red arrow pointer to the system that you want to set, and then press the OK button. PC System Menu The PC System Menu icon displays the system being selected. Systems on this dialog box can be selected. Custom Mode (1~5) set in the PC Adjustment Menu. (p27, 28) Computer Input 25