Canon LV-S4 Owners Manual - Page 28

Computer Input Display area Press the OK button to display the Display area dialog box. Select the resolution at the Display area dialog box. Display area H Adjust the horizontal area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value and then press the OK button. Display area V Adjust the vertical area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value and then press the OK button. Full screen With this function on, SXGA image is fully displayed at 4 : 3 aspect ratio. It is displayed at 5 : 4 aspect ratio with this function off. Reset To reset the adjusted data, select Reset and press the OK button. The confirmation box will appear and then select [Yes]. All adjustments return to their previous figures. Mode free To clear adjusted data previously set, move the red frame pointer to the Mode free icon and then press the OK button. Move the red arrow pointer to the Mode that you want to clear and then press the OK button. Store To store adjusted data, move the red frame pointer to the Store icon and then press the OK button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the OK button. Quit Exit the PC Adjustment Menu. Press the OK button at the Display area icon and the Display area dialog box appears. Display area To store adjusted data This Mode has parameters being stored. Vacant Mode Show values of "Total dots," "Horizontal," "Vertical," "Display area H," and "Display area V." To clear adjusted data ✔Note: • Auto PC Adj., Display area, Display area (H/V), and Full screen cannot be selected when "480i", "575i", "480p", "575p", "720p", "1035i", or "1080i" is selected in the Computer System Menu (p25). 28 Close this dialog box.