Canon LV-S4 Owners Manual - Page 36
Reset, Store, Progressive, Close the Image Level Adjustment.
View all Canon LV-S4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Video Input Progressive Interlaced video signal can be displayed in a progressive picture. Off . . . .Not activated. L1 . . . . .Select "L1" for an active picture. L2 . . . . .Select "L2" for a still picture. Film This function is effective on 3-2 pulldown video sources. With this function on, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the OK button. The confirmation box will appear and then select [Yes]. All adjustments return to their previous figures. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the OK button. The message "OK?" will appear. Select [Yes] to store the manual adjustment. To set this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p34). If you change the Image level (p34) without storing the adjusted data, the figures will go back to the factory default settings. Quit Close the Image Level Adjustment. ✔Note: • Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. (p33) • Film can only be activated when selecting NTSC for Video System and L1/ L2 for Progressive and in any state shown below. 1. When selecting NTSC, NTSC4.43 PAL-M or 480i in the Video System Selection (p33). 2. When selecting Auto and signal is NTSC, NTSC4.43, PAL-M(Composite) or 480i(Component) in the Video System Selection (p33). • 3-2 Pulldown or Telecine transfer is the process of changing images from film mode to video mode. While film runs at 24 frames per second (fps), NTSC television signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded up to 30fps and transferred using a proper field pattern to get the best film-like images. Store icon "OK?" message Move the pointer to [Yes] and then press the OK button. 36