Canon LV-S4 Owners Manual - Page 27

Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 buttons to move the red frame PC Adjust Menu PC Adjust Menu icon pointer to the PC Adjust Menu icon. 2 Press the Point d button to move the red frame pointer to the item that you want to adjust and then press the OK button. An adjustment dialog box will appear. Press the Point 7 8 buttons to adjust the value. Move the red frame pointer to an item and press the OK button. Fine sync Eliminate flicker from the displayed image. Press the Point 7 8 buttons to adjust value. (From 0 to 31) Total dots Adjust the number of total dots in one horizontal period. Press the Point 7 8 buttons and adjust number to match your PC image. Show status (Stored Selected Mode / Free) of the selected Mode. Horizontal Adjust horizontal picture position. Press the Point 7 8 buttons to adjust the position. Vertical Adjust vertical picture position. Press the Point 7 8 buttons to adjust the position. Current mode Press the OK button to show H-Freq. and V-Freq. of the connected computer. Press the Point 7 8 buttons to adjust the value. Press the OK button at this icon to adjust the other items. Clamp Adjust clamp level. When the image has dark bars, try this adjustment. Current mode Press the OK button at the Current mode icon to show the information of the connected computer. Computer Input 27