Canon LV-S4 Serial Functional Specification - Page 11

SERIAL FUNCTIONAL SPECIFICATION 7.24. Menu OFF Command Command "C1D" [CR] Detail Clear Menu of On Screen Display Response Acceptable [ACK] [CR] Unacceptable "?" [CR] Page 10 of 18 7.25. Display Clear Command Command "C1E" [CR] Detail Clear the On Screen Display Clear the On screen Display unconditionally Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 7.26. Brightness + Command Command "C20" [CR] Detail Brightness of user control +1 Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 7.27. Brightness - Command Command "C21" [CR] Detail Brightness of user control -1 Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 7.28. Image (Toggle) Command Command "C27" [CR] Detail Switch Image setting status. This command works the same as the remote control's "Image" button. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 7.29. ON Start Enable Command Command "C28" [CR] Detail Set to Power ON Start This status is stored in EEPROM, so even if turning off and on.. Response Acceptable [ACK] [CR] Unacceptable "?" [CR]