Canon LV-S4 Serial Functional Specification - Page 4
Overview, Interface Specification, Connection, Projector, COM No. 1, Control Port, D-Sub 9 Pin, Mini
View all Canon LV-S4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SERIAL FUNCTIONAL SPECIFICATION Page 3 of 18 1. Overview 1.1 This Specification defines projector control commands for LV-S4 (0.5"SVGA model). 1.2 The projector control commands are for controlling projector through RS232C from a computer. 2. Interface Specification Item Specification Shynchro system Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bit Parity None Stop Bit 1 Flow Control None 1. Transfer rate: initial setting value is 19200 2. Transfer rate can be changed by service mode 3. Connection The serial cable that is specified in the specification as below must be used for a connection to a computer and a projector. PC COM No. 1 CD 1 RXD 2 TXD 3 DTR 4 SG 5 DSR 6 RTS 7 CTS 8 RING 9 (D-Sub 9 Pin) Projector Control Port 1 2 3 4 5 6 7 8 (Mini-DIN 8 Pin)