Canon MX7600 Quick Start Guide - Page 137
An Error Message Is Displayed on the LCD, Message, Action
UPC - 013803087895
View all Canon MX7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
An Error Message Is Displayed on the LCD If an error message is displayed on the LCD, take the corresponding action described below. Message Action "The ink may have run out. You are recommended to stop printing, then replace the ink tank." (when printing is in progress) / "The ink may have run out. Replacing the ink tank is recommended." (when printing is not in progress) U044 Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to press the machine's Stop/ Reset button to stop printing, replace the ink tank, and then print again. If printing is in progress and you want to continue printing, press the machine's OK button. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition. See "Replacing an Ink Tank" on page 103. "The clear ink tank is empty. Replacing the ink tank is recommended." U045 "Print head is not installed. Install the print head." U051 "The type of print head is incorrect. Install the correct print head." U052 "Some ink tanks are not installed in place." U072 "More than one ink tank of the following color is installed." U071 "The following ink tank cannot be recognized." U043 U140 U150 Note z If multiple ink lamps are flashing red, see "Getting the Color or Black Ink Status Information" on page 103 and check the status of each ink tank. z Since printing in this condition may cause the contents of the fax to be lost, the machine stores received faxes in memory without printing until the ink tank is replaced. Print the fax stored in memory manually after replacing the ink tank. You can set the machine to print received faxes forcibly without storing them in memory, but a part of contents or all contents of the fax may not be printed. The clear ink tank is empty. You are recommended to replace the clear ink tank with a new one. If printing is in progress and you want to continue printing, press the machine's OK button. Then printing can continue. Replacing the clear ink tank is recommended after the printing. If the clear ink runs out, you will not be able to print on plain paper. See "Replacing an Ink Tank" on page 103. Follow the directions given in your setup sheet to install the Print Head. If the Print Head is already installed, remove the Print Head once and then reinstall it. If the error is not resolved, the Print Head may be damaged. Contact your Canon service representative. Possible causes are as follows: z Some ink tanks are not installed in the correct position. (The lamp on the ink tank flashes.) z More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.) Confirm that the ink tanks are installed in the appropriate positions. See "Replacing an Ink Tank" on page 103. z The ink tank is not installed. Install the ink tank. See "Replacing an Ink Tank" on page 103. z The ink tank is not compatible with this machine. (The lamp on the ink tank is off.) Install an appropriate ink tank. See "Replacing an Ink Tank" on page 103. z An Ink tank error has occurred. (The lamp on the ink tank is off.) Replace the ink tank. See "Replacing an Ink Tank" on page 103. Troubleshooting 133