Canon MX7600 Quick Start Guide - Page 160

156

Troubleshooting

The Machine Makes the Operation Noise Even When

the Machine Is Not in Use

(7)

Close the Document Cover.

(8)

Close the Document Output Slot, then turn on the machine.

When rescanning the document after clearing the error, rescan it from the

first page.

If you cannot remove the document or the document tears inside the machine,

or if the document jam error continues after removing the document, contact

your Canon service representative.

Document Jams in the ADF (Document

Output Slot).

If the document is jammed in the Document Output Slot, open the Document

Output Slot as shown in the figure below and pull out the document.

When rescanning the document after clearing the error, rescan it from the

first page.

If you cannot remove the document or the document tears inside the machine,

or if the document jam error continues after removing the document, contact

your Canon service representative.

Cause

Action

Automatic ink quality maintenance

operation is in progress.

The machine automatically stirs ink to maintain ink quality (while no other

operation is in progress, the “

Performing ink quality maintenance.

” message

is displayed). When this operation is in progress, the machine vibrates and

makes noise. This does not indicate a malfunction, however, so please wait until

the operation is completed.

If this vibration and noise is bothersome, such as when using the machine late

at night, automatic ink quality maintenance can be disabled. For details, refer to

“Device Settings” of the

User’s Guide

on-screen manual.

Important

Enabling ink quality maintenance is recommended. If this function has been

disabled, follow the procedure below. Failure to perform ink quality maintenance

on a regular basis may affect print quality.

(1)

Press the

Menu

button.

(2)

Use the

[

or

]

button to select

Maintenance/settings

, then press the

OK

button.

(3)

Use the

[

or

]

button to select

Maintenance

, then press the

OK

button.

(4)

Use the

{

or

}

button to select

Ink quality maintenance

, then press the

OK

button.

(5)

Use the

{

or

}

button to select

Yes

, then press the

OK

button.

The machine will vibrate for about 10 seconds, and up to 2 minutes, while the

machine stirs the inks. Do not open the Scanning Unit (Printer Cover) while

the machine is operating.

Cause

Action

Section	Page
Introduction	6
Safety Precautions	7
Before Using the Machine	10
Included Items	10
Operation Panel	11
How to Navigate Menus on the LCD	13
Turning the Machine On and Off	18
Handling the Original Document	20
Loading Printing Paper	24
Copying	36
Making Copies	36
Setting Items	37
Using Useful Copy Functions	39
Printing from a Memory Card	40
Memory Cards Supported by This Machine	40
Printable Image Data	41
Inserting the Memory Card	41
Removing the Memory Card	43
Printing the Photo Displayed on the LCD (Display photo)	43
Using Useful Printing Functions	44
Setting Items	45
Printing by Using the Photo Index Sheet	47
Printing from Your Computer	48
Printing with Windows	48
Printing with Macintosh	49
Scanning Images	50
Scanning Methods	50
Printing Photographs Directly from a PictBridge Compliant Device	52
Printing Photographs Directly from a PictBridge Compliant Device	52
About PictBridge Print Settings	54
Faxing	58
Preparing the Machine for Fax	58
Registering Sender Information	63
Registering Recipients for the Speed Dial	72
Sending Faxes	81
Using Useful Sending Functions	89
Receiving Faxes	91
Using Useful Receiving Functions	98
Document Stored in Memory	99
Summary of Reports and Lists	103
Routine Maintenance	107
Replacing an Ink Tank	107
Keeping the Best Printing Results	116
When Printing Becomes Faint or Colors Are Incorrect	117
Printing the Nozzle Check Pattern	118
Examining the Nozzle Check Pattern	119
Print Head Cleaning	120
Print Head Deep Cleaning	121
Aligning the Print Head	122
Performing Ink Quality Maintenance Manually	126
Cleaning Your Machine	127
Troubleshooting	135
An Error Message Is Displayed on the LCD	137
LCD Cannot Be Seen At All or Display is Difficult to See	143
An Unintended Language Is Displayed on the LCD	143
Cannot Install the MP Drivers	144
Cannot Connect to Computer Properly	145
Print Results Not Satisfactory	146
The Print Result Not Satisfactory When Copying	149
Printing Does Not Start	150
The Machine Stops Printing before Completion and Ejects Partially Printed or Blank Paper	151
Machine Moves But Ink Is Not Ejected	152
Paper Does Not Feed Properly	152
Paper Jams	153
Document Jams in the ADF	157
The Machine Makes the Operation Noise Even When the Machine Is Not in Use	160
Message Appears on the Computer Screen	161
Error Message Appears on a PictBridge Compliant Device	165
Cannot Print Properly from a Photo Index Sheet	166
Cannot Remove a Memory Card	166
Scanning Problems	166
Problems Receiving Faxes	167
Problems Sending Faxes	170
Telephone Problems	171
Appendix	172
How to Use the Documentation Provided	172
Reading the On-screen Manuals	173
Solution Menu (Windows only)	174
My Printer (Windows only)	174
Specifications	175
Legal Limitations on Use of Your Product and Use of Images	179
Users in the U.S.A.	180
For California, USA only	184
Users in Canada	185
Users in New Zealand	186

Canon MX7600 Quick Start Guide - Page 160

The Machine Makes the Operation Noise Even When the Machine Is Not in Use

Page 160 highlights