Canon MX7600 Quick Start Guide - Page 166
Cannot Print Properly from a Photo Index Sheet, Cannot Remove a Memory Card, Scanning Problems - scanner driver
UPC - 013803087895
View all Canon MX7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Error Message On PictBridge Compliant Device "Ink Error" "Hardware Error" "Printer error" Action An ink tank that was once empty is installed. For details on how to resolve the error, see ""Printer detected ink out condition. Stop printing, then replace the ink tank." (when printing is in progress) / "Printer detected ink out condition of the following ink. Replace the ink tank." (when printing is not in progress) U172" on page 134. An ink tank error has occurred. Replace the ink tank. See "Replacing an Ink Tank" on page 103. An error requiring servicing may have occurred. Disconnect the USB cable between the machine and the PictBridge compliant device, turn off the machine, and unplug the power cord of the machine from the power supply. After five minutes or more, plug the power cord of the machine back in, turn on the machine, and then reconnect the PictBridge compliant device to the machine. If the same error occurs, contact your Canon service representative. Cannot Print Properly from a Photo Index Sheet Cause "Failed to scan Photo Index Sheet." is displayed. Action z Make sure the Photo Index Sheet is set in the correct position and orientation on the Platen Glass. z Make sure the Platen Glass and the Photo Index Sheet are not dirty. z Make sure all required circles on the Photo Index Sheet are filled in. If the filled circles on the sheet are not marked dark enough, the machine may not scan the settings. See "Printing by Using the Photo Index Sheet" on page 43. Cannot Remove a Memory Card Cause Action miniSD Card, microSD Card, xDPicture Card, Memory Stick Duo, Memory Stick PRO Duo, or RS-MMC is attempted to insert into the machine without attaching to the special adapter. Contact your Canon service representative. Important Never attempt to remove a memory card using a thin stick or tweezers. Doing so may damage the machine. Scanning Problems ScanGear Won't Start Cause The scanner driver (ScanGear) is not installed. Action Follow the procedure described in your setup sheet or the Network Setup Guide to reinstall the MP Drivers. Other Scanning Troubles Refer to the Scanning Guide on-screen manual. 162 Troubleshooting