Canon PIXMA MG6120 Network Setup Troubleshooting - Page 15
Restoring the Machine's Default LAN Settings to Perform Setup Again, Device settings, LAN settings - setup manual
View all Canon PIXMA MG6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 With Setup displayed on the HOME screen, touch the right FUNCTION button. 2 Select Device settings, then touch the OK button. 3 Select LAN settings, then touch the OK button. 4 Select Reset LAN settings, then touch the OK button. 5 Select Yes, then touch the OK button. 6 Make sure that the completion screen appears, then touch the OK button. • The LAN settings screen returns. Touch the HOME button. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed manual: Getting Started. Wireless LAN SSID Data encryption TCP/IP setting Wired LAN TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically Inactive Obtain an IP address automatically 14