Canon PIXMA MG6120 Network Setup Troubleshooting - Page 5

Check 5 Is TKIP set as an encryption standard when the access point is configured to communicate using IEEE802.11n standard only? If the encryption standard of the access point is set to TKIP, IEEE802.11n cannot be used as a communication standard. Set the encryption standard to other than TKIP or set the communication standard to other than IEEE802.11n, then configure wireless LAN settings again. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Glossary • DHCP function A function to automatically assign required information (IP address, etc.) to computers, printers or other devices connected to the network. Multiple access points with the same name exist. is Displayed Check The message appears when multiple access points with the same name are found. When you have only one access point Select Use one AccessPoint only, then select the MAC address of the target access point. • For subsequent operations, go to or / / in "Entering the Access Point's Wireless LAN Settings Directly on the Machine" on page 11. • For details on how to check the MAC address of the access point, refer to the manual supplied with the access point or contact its manufacturer. When using multiple access points Select Use multiple AccessPoints. • For subsequent operations, go to or / / in "Entering the Access Point's Wireless LAN Settings Directly on the Machine" on page 11. Glossary • MAC address A unique number assigned to each network device.