Canon PIXMA MP810 Quick Start Guide - Page 78
LCD Cannot Be Seen At All, An Unintended Language Is Displayed on the LCD, Cannot Install the MP
View all Canon PIXMA MP810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
LCD Cannot Be Seen At All Cause Cannot see the display on the LCD. Action z If the POWER lamp is off The machine is not powered on. Connect the power cord and press the ON/ OFF button. The machine will power on and the LCD will display a message. z If the POWER lamp is lit The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the ON/OFF button. An Unintended Language Is Displayed on the LCD Cause Action The language you want to be displayed is not selected. Select the language you want to be displayed according to the following procedure. (1)Press the HOME button. Wait for about 5 seconds, select , and then press the OK button. (2)Press the ] button to select , then press the OK button. (3)Press the } button four times, then press the OK button. If the Bluetooth unit is connected to the machine, press the } button five times, and then press the OK button. (4)Press the { or } button to select the language you want to be displayed, then press the OK button. Cannot Install the MP Drivers Cause Unable to proceed beyond the Printer Connection screen. Action If you were unable to proceed beyond the Printer Connection screen, follow the procedure below to reinstall the MP Drivers. (1)Click Cancel on the Printer Connection screen. (2)Click Start Over on the Installation Failure screen. (3)Click Back on the screen that appears next. (4)Click Exit on the Welcome screen, then remove the CD-ROM. (5)Turn the machine off. (6)Restart the computer. (7)Make sure you have no application software running, including anti-virus software. (8)Follow the procedure described in the Easy Setup Instructions to reinstall the MP Drivers. 74 Troubleshooting