Canon PIXMA MX410 Network Setup Troubleshooting - Page 11
Action, Restoring the Machine's Default LAN Settings to Perform Setup Again - wireless manual
View all Canon PIXMA MX410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 Use the Menu button to select Device settings. 2 Use the [ or ] button to select LAN settings, then press the OK button. 3 Select Reset LAN settings, then press the OK button. 4 Select Yes, then press the OK button. 5 Make sure that the screen shown to the right appears. • After a while, the Device settings screen returns. Press the COPY button. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures from "7 Set Up a Wireless Connection" in the printed manual: Getting Started. Wireless LAN SSID Data encryption TCP/IP settings Inactive BJNPSETUP Inactive Obtain an IP address automatically 10