Canon PIXMA MX410 Network Setup Troubleshooting - Page 9

Other Troubleshooting Tips Reference Information Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key Check Check the access point settings. • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. The Machine is Not Detected after the Network Environment is Changed Check Wait until the IP address is assigned to the computer. You may need to restart your computer. • Search for the machine again after confirming a valid IP address is assigned to the computer. Glossary • IP address A numerical identification assigned to each computer or network device connected to a network. Configuring Wireless LAN Settings Manually Action Enter the access point name/network name (SSID) and security setting (WEP, WPA, etc.) directly. Follow the procedure below. 1 Perform to in "Software Installation (1)" in the printed manual: Getting Started. • If the Detected Access Points List screen is displayed, go to . 2 When the Confirm Connection Access Point screen appears, click No (A). • The Detected Access Points List screen is displayed. A 3 Click Manual Setup (B). • The Manual Setup screen is displayed. B 4 Enter the access point name/network name (SSID) in SSID (C). C 5 Select the security protocol for the access D point in Encryption Method (D), then click Configuration (E). • Go to either of the following steps according to the selected Encryption Method (security protocol). E Disable Go to on page 9. WEP Go to on page 9. WPA/WPA2 Go to on page 9.