Canon PIXMA MX410 Network Setup Troubleshooting - Page 8

ENGLISH Problems during Network Setup WPS Multiple APs detected is Displayed Action The message appears when multiple access points are detected. Wait for a while, then configure the settings again. Failed to connect is Displayed Check The message appears when an error occurs. Check the access point settings, then configure WPS settings again. • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. • For the procedure to configure WPS settings of the machine, refer to "Wireless Setup Using WPS (Wi-Fi Protected Setup)" in the printed manual: Getting Started. • When using an access point that does not support WPS, configure the settings by referring to "7 Set Up a Wireless Connection" in the printed manual: Getting Started. PIN codes do not match is Displayed Action The message appears when setup is not completed within 10 minutes. Follow the procedure below to configure WPS settings again. 1 Select PIN code method on the WPS screen, then press the OK button. • A new PIN code appears. 2 Set the new PIN code to the access point or computer. • For details on how to set PIN codes to the access point or computer, refer to the manual supplied with your access point or contact its manufacturer.