Canon PowerShot ELPH 330 HS User Guide - Page 122
View the listed access points., Choose an access point., Enter the access point's, encryption key., - code
View all Canon PowerShot ELPH 330 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
• When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 - 5 in "Adding a Computer" (= 121). • You can connect to computers that you have already connected to by choosing them on the [Select a Device] screen in step 3. • If you chose [PIN Method] in step 5, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user guide included with your access point. • To add multiple computers, repeat the above procedures starting from step 1. • To disconnect from the camera, turn off the camera. • After you have accessed the Wi-Fi menu once, you can access it again by pressing the button. The recent target device is listed first, so you can easily connect again by pressing the buttons to choose it. To add a new device, display the device selection screen by pressing the buttons, and then configure the setting. If you prefer not to display recent target devices, press the button, and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off]. Connecting to Access Points in the List 1 View the listed access points. zzView the listed networks (access points) as described in steps 1 - 3 of "Adding a Computer" (=120). 2 Choose an access point. zzPress the buttons to choose a network (access point), and then press the button. 3 Enter the access point's encryption key. zzPress the button to access the keyboard, and then enter the encryption key (=111). zzPress the buttons to choose [Next], and then press the button. 4 Choose [Auto]. zzPress the buttons to choose [Auto], and then press the button. XXA list of other devices connected to the access point will appear in the [Select a Device] screen. Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 1 Camera Basics 2 Auto Mode/Hybrid Auto Mode 3 Other Shooting Modes 4 P Mode 5 Playback Mode 6 Wi-Fi Functions 7 Setting Menu 8 Accessories 9 Appendix Index 122