Canon PowerShot G7 X Mark II User Manual - Page 170

Changing the Video System Set the video system of any television used for display. This setting determines the image quality (frame rate) available for movies. zzChoose [Video system] on the [ 1] tab, and then choose an option. Electronic Level Calibration Calibrate the electronic level if it seems ineffective in helping you level the camera. For greater calibration accuracy, display grid lines (=106) to help you level the camera in advance. 1 Make sure the camera is level. zzPlace the camera on a flat surface, such as a table. 2 Calibrate the electronic level. zzChoose [Electronic Level] on the [ 1] tab, and then press the [ ] button. zzTo adjust left/right tilt, choose [Horizontal Roll Calibration], and to adjust forward/ backward tilt, choose [Vertical Pitch Calibration], followed by the [ ] button. A confirmation message is displayed. zzChoose [OK], and then press the [ ] button. Resetting the Electronic Level Restore the electronic level to its original state as follows. Note that this is not possible unless you have calibrated the electronic level. zzChoose [Electronic Level] on the [ 1] tab, and then press the [ ] button. zzChoose [Reset], and then press the [ ] button. zzChoose [OK], and then press the [ ] button. Start-Up Screen Customize the start-up screen shown after you turn the camera on as follows. zzChoose [Start-up Image] on the [ 1] tab, and then press the [ ] button. zzPress the [ ][ ] buttons or turn the [ ] dial to choose an option. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, M, and C Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 170