Canon PowerShot G7 X Mark II User Manual - Page 95

Flash Changing the Flash Mode Still Images Movies You can change the flash mode to match the shooting scene. For details on the flash range, see "Camera" (= 217). 1 Raise the flash. zzMove the [ ] switch. 2 Configure the setting. zzPress the [ ] button, choose a flash mode (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button. zzThe option you configured is now displayed. ●● The setting screen cannot be accessed by pressing the [ ] button when the flash is lowered. Move the [ ] switch to raise the flash, then configure the setting. ●● If the flash fires, vignetting may occur. ●● You can also configure this setting by pressing the [ ] button, touching the desired option, and then touching it again. Auto Fires automatically in low-light conditions. On Fires for each shot. Slow Synchro Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range. ●● In [ ] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (=52). ●● In [ ] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing. Off For shooting without the flash. ●● A blinking [ ] icon may be displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions. In this case, mount the camera on a tripod or take other measures to keep it still. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, M, and C Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 95