Canon PowerShot SX200 IS PowerShot SX200 IS Camera User Guide - Page 127
Trimming
View all Canon PowerShot SX200 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
[ Trimming You can cut out a portion of a recorded image and save it as a new image file. Trimming Area Trimming Area Display Recorded pixels after trimming Select [Trimming]. ● Press the n button, select the 1 tab and [Trimming], then press the m button. Select an image. ● Press the qr buttons or turn the  dial, select the image and press the m button. Adjust the trimming area. X A frame will appear around the portion of the image to be trimmed. X The original image will display in the upper left and the trimmed image will display in the lower right. ● If you move the zoom lever to the left or right, you can change the frame size. ● If you press the opqr buttons, you can move the frame. ● If you press the l button, you can change the frame size. ● In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by turning the  dial. ● Press the m button, use the qr buttons or turn the  dial to select [OK], then press the m button again. Save as a new image and display. ● Perform Steps 4 and 5 on p. 126. 127