Canon REALiS LCOS WUX4000 User Manual - Page 171

Network Settings on the Projector From the projector menus screen, network settings can be configured in the [Network Setting] tab. For the menu operations, refer to page 88. (The screen is for the WUX5000 / WUX4000.) Locking the Network Settings You can lock / unlock the network settings so that they cannot be changed and cancel the lock. MENU > [Network Setting] > [Network Setting lock] Installation Manual Connecting to a Network Unlock Cancels the lock and allows other network settings to be changed. The password must be entered in order to cancel the lock. When [Unlock] is selected, the window shown below appears. Use the buttons to enter the 4-digit password. For the WX6000 / SX6000, numbers can be entered using the numerical buttons on the remote control. Lock Lock the settings. After the OK button is pressed to accept your setting and the MENU button or the EXIT button (WUX6000 / SX6000) is pressed to close the window, the lock is re-engaged. If you change the network settings, be sure to continue operating without closing the window. • [Lock] is the factory default. • For the default network password, refer to page 173. 171