Canon REALiS LCOS WUX4000 User Manual - Page 62
Mac OS X, AUTO PC, Performing the Auto PC Function
View all Canon REALiS LCOS WUX4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Adjusting the Image ■Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the [System Preferences] window, click the [Displays] icon to display the Display window. 3 Select the [Display] tab and select the resolution closest to the maximum output signal resolution of the computer from the [Resolutions] list. 4 Close the [System Preferences] window. AUTO PC If the image display is shifted or there is flickering of the screen when [Analog PC] (WUX5000 / WUX4000) or [Analog PC-1] [Analog PC-2] (WX6000 / SX6000) is selected, press the AUTO PC button to adjust the projector to the optimal condition. The adjustment results will be stored. If the projector is used again with the same computer, when the input signal is selected the image will be projected automatically under the same conditions that were previously adjusted. ■Performing the Auto PC Function Press the AUTO PC button to perform projector adjustment. Remote control If the projected image was not properly adjusted with the [AUTO PC] function, perform the following steps. • From [Input signal select], select an input signal type based on the resolution of the com- puter. (P94) • If the adjustment is still insufficient, from [Input signal settings] select [Total dots], [Track- ing], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] to make adjustments. (P95 - P98) • For the signal types supported by the projector, see the table on page 218. 62