Canon REALiS LCOS WUX4000 User Manual - Page 233

Menu Configuration Image Adjustment Menu Image mode COMMON P109 Standard * Photo/sRGB User 1 - 5 (as creating profile) Digital PC / Analog PC / HDMI (when [HDMI In] P109 is [Computer]) Presentation VividPhoto Component / HDMI (when [HDMI In] is [Auto]) P109 Dynamic Video Cinema Create Profile P110 Baseline Image P110 Mode (when user memory is selected) Brightness P111 Contrast P112 Sharpness P113 Gamma P113 Advanced adjustment Ambient light Off * Adjust P115 Type Tungsten Fluorescent Fluorescent H Level L M H Return Noise reduction *2 Component / HDMI P116 Off Weak Middle Strong Dynamic gamma Off *1 Weak *2 Middle Strong P116 Color adjustment P114 Color level Color balance Color temperature R Gain G Gain B Gain R Offset G Offset B Offset Mem. color correct *3 Off L M H P117 6-axis color adjust Off * Adjust Reset P117 Hue / Saturation / Brightness Fine-Tune Gamma P118 Return Lamp mode *4 Normal * Quiet P119 Reset OK / Cancel P119 Factory default settings for *1, *2 and *3 are set accord- ing to the following conditions. *1: • For Analog PC, Digital PC or HDMI (when [HDMI In] is [Computer]), the factory default is [Off]. • For Component, and HDMI (when [HDMI In] is [Auto]), the factory default is [On]. *2: • For HDMI (when [HDMI In] is [Auto]), the factory default is [Off]. • For Component, the factory default is [Weak]. *3: • For HDMI (when [HDMI In] is [Computer]), Digi- tal PC or Analog PC, if any image mode is used except [VividPhoto], the factory default is [Off]. If [VividPhoto] is used, the factory default is [Middle]. • For HDMI (when [HDMI In] is [Auto]) or Compo- nent, the factory default is [Weak], regardless of the image mode. *4: • WUX4000 233