Canon REALiS LCOS WUX4000 User Manual - Page 76
Adjusting Keystone Distortion, Press the D.SHIFT/KEYSTONE button WUX5000 / WUX4000 or KEYSTONE button
View all Canon REALiS LCOS WUX4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Adjusting the Image Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button (WX6000 / SX6000) can be used to correct keystone distortion. • Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is too large to adjust, move the projector installation position so that it is completely straight. • The result of keystone adjustment is stored in memory. If you place the projector in the same position, the keystone adjustment is not necessary. • Signals are processed digitally when keystone distortion is corrected. The image may look different from the original one. In addition, the aspect ratio of the image may change. • Perform keystone distortion correction with the lens shift position in the home position. Correction will not be performed correctly if the position is not the home position. 1 Press the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button (WX6000 / SX6000) to display the window in the center illustration below. Remote control Remote control 76