Canon REALiS LCOS WUX6000 WUX6000 Command List
Canon REALiS LCOS WUX6000 Manual
View all Canon REALiS LCOS WUX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS LCOS WUX6000 manual content summary:
- Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 1
MULTIMEDIA PROJECTOR WUX6000 User Commands © CANON INC.2014 YT1-1456-000 - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 2
Flow 8 Command Transmission (PC side) ...8 Command Reception (projector side)...8 Command/Response ...8 Response Reception Timeout ...8 Other ...8 4. Command List ...9 5. Guide to command description 12 EXAMPLE ...12 6. Command Details 14 6AXADJ ...14 6AXR...15 6AXG ...16 6AXB...17 6AXC...18 6AXM - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 3
...81 SHARP...82 SIGMSG...83 SIGNAL_INFO ...84 SIGNALSTATUS ...85 TEMP ...86 TPTN...87 ZSCLR ...89 7. Error List...90 8. Error Processing...91 9. Simplified Version for the Manual 92 - iii - - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 4
WUX6000 User Commands 1. Overview These specifications describe the methods of controlling Projector WUX6000 from PC or other controllers over an RS232C connection or LAN. Symbol The following symbols are used in these specifications: Symbol [ ] | Data in [ ] can be omitted. Same as OR. - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 5
via RS-232C or LAN cable connection. PC - Projector connection configuration LAN PORT LAN PORT PC Network connection COM PORT PC SERVICE PORT RS232C crossover cable PROJECTOR Item Connection system Connection signal line Connection cable RS-232C connection Specifications PC and projector - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 6
WUX6000 User Commands Usable Character Codes Use ASCII codes in the red and blue areas of the following table. No distinction is made between double-byte characters and single-byte characters. All characters are interpreted as single-byte characters. Do not use double-byte or triple-byte characters - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 7
), or NUL (00h) are handled as spaces (20h). Communication procedure No procedure Flow control None Error control None Break signal Not supported Timeout Tc Between characters: 1 s Between command / Tr response interval: 15 s * For timeout, see chapter 3, "Communication Flow" on page - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 8
WUX6000 User Commands Response Format Responses are sent from the projector to PC in the following format: There are multiple response types, each having different format. Character strings consisting of 1 or - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 9
WUX6000 User Commands Reference command response A response when reference is made properly for a reference command. Format) g:= Example) PC to PJ G E T = P OWE R CR 47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h 0Dh PJ to PC g : P OWE R = O N CR 67h 3Ah 50H - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 10
WUX6000 User Commands Normal response (BUSY) This response is sent when a command cannot be received during processing. Format) i:BUSY Example) PC to PJ A U T O P C CR 41h 55h 54h 4Fh 50h 43h 0Dh PJ to PC I : B U S Y CR 69h 3Ah 42h 55h 53h 59h 0Dh Other Command recognition The - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 11
WUX6000 User Commands 3. Communication Flow Command Transmission (PC side) Commands should be sent from PC in a way that each character is sent within the specified Tc (inter-character timeout). Command Reception (projector side) The projector retains incoming characters within a specific Tc, and - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 12
WUX6000 User Commands 4. Command List Item Command Setting Reference Description Power mode restriction LAN RS-232C SL0 SL1 SL3 PM ON ST PM ON 1 6AXADJ Yes Yes 6-axis color adjustment - - - - Yes - - Yes 2 6AXR 6-axis color adjustment R Yes Yes hue/saturation/brightness - - - - Yes - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 13
WUX6000 User Commands Item Command Setting Reference Description 35 FNBND Yes 36 FREEZE Yes 37 GAMMA Yes 38 HDMI_IN Yes 39 HDMI_OVSCAN Yes 40 HTMPINF Yes 41 HUE Yes 42 IMAGE Yes 43 IMAGEFLIP Yes 44 INPUT Yes 45 KREP Yes 46 LAMP Yes 48 LAMPCOUNTER - 47 LMPWRN Yes 49 - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 14
WUX6000 User Commands Power mode restriction/LAN: Indicates whether the command coming through LAN is executable. SL0: Standby mode, and the network function is turned off. When the network function is turned off, the command is not executable if coming from LAN, in which case, this should never be - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 15
5. Guide to Command Description This section explains how commands are described. The command descriptions have the format shown below. WUX6000 User Commands EXAMPLE Summary of the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 16
WUX6000 User Commands Environment This defines the environments that support the command (power supply state, input signal state). The command is executable when the projector is in the mode indicated by "Yes" in the table - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 17
6. Command Details WUX6000 User Commands 6AXADJ 6-axis color adjustment Format Setting Reference Command Response Command Response 6AXADJ= i:OK GET=6AXADJ g:6AXADJ= Note: See "Error list" for any response other than the above. - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 18
WUX6000 User Commands 6AXR 6-axis adjustment (red), hue/saturation/brightness Format Setting Reference Command Response Command Response 6AXR=,, i:OK GET=6AXR g:6AXR=,, Note: See " - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 19
WUX6000 User Commands 6AXG 6-axis adjustment (green), hue/saturation/brightness Format Setting Reference Command Response Command Response 6AXG=,, i:OK GET=6AXG g:6AXG=,, Note: See " - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 20
WUX6000 User Commands 6AXB 6-axis adjustment (blue), hue/saturation/brightness Format Setting Reference Command Response Command Response 6AXB=,, i:OK GET=6AXB g:6AXB=,, Note: See " - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 21
WUX6000 User Commands 6AXC 6-axis adjustment (cyan), hue/saturation/brightness Format Setting Reference Command Response Command Response 6AXC=,, i:OK GET=6AXC g:6AXC=,, Note: See " - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 22
WUX6000 User Commands 6AXM 6-axis adjustment (magenta), hue/saturation/brightness Format Setting Command Reference Response Command Response 6AXM=,, i:OK GET=6AXM g:6AXM=,, Note: - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 23
WUX6000 User Commands 6AXY 6-axis adjustment (yellow), hue/saturation/brightness Format Setting Reference Command Response Command Response 6AXY=,, i:OK GET=6AXY g:6AXY=,, Note: See - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 24
WUX6000 User Commands AMBADJ Ambient light correction adjustment ON/OFF Format Setting Reference Command Response Command Response AMBADJ= i:OK GET=AMBADJ g:AMBADJ= Note: See "Error list" for any - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 25
WUX6000 User Commands AMBLEVEL Ambient light level settings Format Setting Reference Command Response Command Response AMBLEVEL= i:OK GET=AMBLEVEL g: AMBLEVEL= Note: See "Error list" for any response other than - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 26
WUX6000 User Commands AMBTYPE Ambient light type settings Format Setting Reference Command Response Command Response AMBTYPE= i:OK GET=AMBTYPE g: AMBTYPE= Note: See "Error list" for any response other than the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 27
WUX6000 User Commands ASELA1 Analog PC-1 audio terminal selection Format Setting Reference Command Response Command Response ASELA1= i:OK GET=ASELA1 g: ASELA1= Note: See "Error list" for any - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 28
WUX6000 User Commands ASELA2 Analog PC-2 Audio input terminal selection Format Setting Reference Command Response Command Response ASELA2= i:OK GET=ASELA2 g:ASELA2= Note: See "Error list" for - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 29
WUX6000 User Commands ASELC Component Audio input terminal selection Format Setting Reference Command Response Command Response ASELC= i:OK GET=ASELC g: ASELC= Note: See "Error list" for any - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 30
WUX6000 User Commands ASELD Digital PC Audio input terminal selection Format Setting Reference Command Response Command Response ASELD= i:OK GET=ASELD g:ASELD= Note: See "Error list" for any - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 31
WUX6000 User Commands ASELH HDMI Audio input terminal selection Format Setting Reference Command Response Command Response ASELH= i:OK GET=ASELH g:ASELH= Note: See "Error list" for any response other than the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 32
WUX6000 User Commands ASELL LAN audio input terminal selection Format Setting Reference Command Response Command Response ASELL= i:OK GET=ASELL g:ASELL= Note: See "Error list" for any response other than the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 33
WUX6000 User Commands ASELU USB audio input terminal selection Format Setting Reference Command Response Command Response ASELU= i:OK GET=ASELU g:ASELU= Note: See "Error list" for any response other than the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 34
WUX6000 User Commands ASPECT Aspect ratio Format Setting Reference Command Response Command Response ASPECT= i:OK GET=ASPECT g:ASPECT= Note: See "Error list" for any response other than the above. < Screen setting parameters:ID > - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 35
WUX6000 User Commands AUTOPC Auto PC Format Setting Reference Command Response Command Response AUTOPC i:OK - Note: See "Error list" for any response other than the above. Environment Power mode restriction LAN RS-232C SL0 SL1 SL3 PM ON ST PM ON No No No No Yes No No Yes Input D-RGB A- - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 36
WUX6000 User Commands AUTOSETEXE Auto setup Format Setting Reference Command Response Command Response AUTOSETEXE= i:OK - - Note: See "Error list" for any response other than the above. < Auto setup parameter:ID > Parameter INPUT Meaning Runs auto input Environment - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 37
WUX6000 User Commands AVOL Audio volume adjustment Format Setting Reference Command Response Command Response AVOL= i:OK GET= AVOL g:AVOL= Note: See "Error list" for any response other than the above. Setting values for are 0 to 20 - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 38
WUX6000 User Commands BLANK Screen blank Format Setting Reference Command Response Command Response BLANK= i:OK GET=BLANK g:BLANK= Note: See "Error list" for any response other than the above. < BLANK parameter:ID > Parameter ON OFF BLANK ON BLANK OFF - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 39
WUX6000 User Commands BRI Brightness Format Setting Reference Command Response Command Response BRI= i:OK GET=BRI g:BRI= Note: See "Error list" for any response other than the above. Setting values for are -20 to - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 40
WUX6000 User Commands COLOR_TEMP Color temperature Format Setting Reference Command Response Command Response COLOR_TEMP= i:OK GET=COLOR_TEMP g:COLOR_TEMP= Note: See "Error list" for any response other than the above. Setting - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 41
WUX6000 User Commands COMVER User command version reference Format Setting Reference Command Response Command Response - - GET=COMVER g:COMVER=" Note: See "Error list" for any response other than the above. Environment Power mode restriction LAN RS-232C - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 42
WUX6000 User Commands CONT Contrast Format Setting Reference Command Response Command Response CONT= i:OK GET=CONT g:CONT= Note: See "Error list" for any response other than the above. Setting values for are -20 to 20. - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 43
WUX6000 User Commands DGAMMA Dynamic gamma Format Setting Reference Command Response Command Response DGAMMA= i:OK GET=DGAMMA g:DGAMMA= Note: See "Error list" for any response other than the above. < Dynamic gamma setting - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 44
WUX6000 User Commands DZOOM_POS Zoom display position Format Setting Reference Command Response Command Response DZOOM_POS=, i:OK GET= DZOOM_POS g:DZOOM_POS=, Note: See "Error list" for any - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 45
WUX6000 User Commands DZOOM_RAT Zoom display ratio Format Setting Reference Command Response Command Response DZOOM_RAT= i:OK GET=DZOOM_RAT g: DZOOM_RAT= Note: See "Error list" for any response other than the above. < DZOOM ratio parameter:ID - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 46
WUX6000 User Commands ERR Error information reference Format Setting Reference Command Response Command Response - - GET=ERR g:ERR= Note: See "Error list" for any response other than the above. Parameter NO_ERROR ABNORMAL_TEMPERATURE - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 47
WUX6000 User Commands FINE_GAMMA_R Fine gamma (R) adjustment Format Setting Reference Command Response Command Response FINE_GAMMA_R=,,ɾɾɾ, - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 48
WUX6000 User Commands FINE_GAMMA_G Fine gamma (G) adjustment Format Setting Reference Command Response Command Response FINE_GAMMA_G=,,ɾɾɾ, - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 49
WUX6000 User Commands FINE_GAMMA_B Fine gamma (B) adjustment Format Setting Reference Command Response Command Response FINE_GAMMA_B=,,ɾɾɾ, - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 50
WUX6000 User Commands FLTWRN Air filter cleaning warning Format Setting Reference Command Response Command Response FLTWRN= i:OK GET= FLTWRN g: FLTWRN= Note: See "Error list" for any response other than the above. FLTWRN= - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 51
WUX6000 User Commands FNBND [Fn] button setting Format Setting Reference Command Response Command Response FNBND= i:OK GET= FNBND g: FNBND= Note: See "Error list" for any response other than the above. - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 52
WUX6000 User Commands FREEZE Screen freeze Format Setting Reference Command Response Command Response FREEZE= i:OK GET= FREEZE g: FREEZE= Note: See "Error list" for any response other than the above. < FREEZE parameter:ID > Parameter ON On OFF Off - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 53
WUX6000 User Commands GAMMA Gamma adjustment Format Setting Command GAMMA= Response i:OK Reference Command GET=GAMMA Response g: GAMMA= Note: See "Error list" for any response other than the above. Setting values for - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 54
WUX6000 User Commands HDMI_IN HDMI input setting Format Setting Reference Command Response Command Response HDMI_IN= i:OK GET= HDMI_IN g: HDMI_IN= Note: See "Error list" for any response other than the above. < HDMI input setting - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 55
WUX6000 User Commands HDMI_OVSCAN HDMI overscan setting Format Setting Reference Command Response Command Response HDMI_OVSCAN= i:OK GET= HDMII_OVSCAN g:HDMI_OVSCAN= Note: See "Error list" for any response other than the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 56
WUX6000 User Commands HTMPINF High temperature caution display Format Setting Reference Command Response Command Response HTMPINF= i:OK GET= HTMPINF g:HTMPINF= Note: See "Error list" for - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 57
WUX6000 User Commands HUE Hue setting Format Setting Reference Command Response Command Response HUE= i:OK GET= HUE g:HUE= Note: See "Error list" for any response other than the above. Setting values for are -20 to - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 58
WUX6000 User Commands IMAGE Image mode setting Format Setting Reference Command Response Command Response IMAGE= i:OK GET= IMAGE g: IMAGE= Note: See "Error list" for any response other than the above. - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 59
WUX6000 User Commands IMAGEFLIP Flip display Format Setting Reference Command Response Command Response IMAGEFLIP= i:OK GET= IMAGEFLIP g: IMAGEFLIP= Note: See "Error list" for any response other than the above. < Image flip - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 60
WUX6000 User Commands INPUT Input signal selection Format Setting Reference Command Response Command Response INPUT= i:OK GET= INPUT g: INPUT= Note: See "Error list" for any response other than the above. < Image flip setting - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 61
WUX6000 User Commands KREP Key repeat Format Setting Reference Command Response Command Response KREP= i:OK GET=KREP g:KREP= Note: See "Error list" for any response other than the above. < Key repeat parameter:ID> Parameter OFF ON Turned off - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 62
WUX6000 User Commands LAMP Lamp mode Format Setting Reference Command Response Command Response LAMP= i:OK GET=LAMP g:LAMP= Note: See "Error list" for any response other than the above. < Lamp output setting parameters:ID > - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 63
WUX6000 User Commands LAMPCOUNTER Lamp counter reference Format Setting Reference Command Response Command Response GET=LAMPCOUNTER g:LAMPCOUNTER=" Note: See "Error list" for any response other than the above. < Lamp ON time:Character string > Lamp counter "[ - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 64
WUX6000 User Commands LMPWRN Lamp replacement warning Format Setting Reference Command Response Command Response LMPWRN= i:OK GET=LMPWRN g: LMPWRN= Note: See "Error list" for any response other than the above. < Lamp warning parameter:ID> - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 65
WUX6000 User Commands LPOSLD Lens position load Format Setting Reference Command Response Command Response LPOSLD= i:OK - Note: See "Error list" for any response other than the above. Parameter 1 Position load - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 66
WUX6000 User Commands MAIN Unit control panel emulation Format Setting Reference Command Response Command Response MAIN= i:OK - Note: See "Error list" for any response other than the above. < Side control emulation button parameters:ID > Parameter - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 67
Example (Setting) >MAIN=MENU < i:OK Note: '>' indicates a command; ' - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 68
WUX6000 User Commands MEMF Memory color adjustment (flesh) Format Setting Reference Command Response Command Response MEMF= i:OK GET=MEMF g:MEMF= Note: See "Error list" for any response other than the above. < Memory - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 69
WUX6000 User Commands MEMG Memory color adjustment (green) Format Setting Reference Command Response Command Response MEMG= i:OK GET=MEMG g:MEMG= Note: See "Error list" for any response other than the above. < Memory - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 70
WUX6000 User Commands MEMS Memory color adjustment (sky) Format Setting Reference Command Response Command Response MEMS= i:OK GET=MEMS g:MEMS= Note: See "Error list" for any response other than the above. < Memory - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 71
WUX6000 User Commands MUTE Mute control Format Setting Reference Command Response Command Response MUTE= i:OK GET=MUTE g:MUTE= Note: See "Error list" for any response other than the above. < Mute control parameter:ID> Parameter ON OFF - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 72
WUX6000 User Commands NR Random noise reduction Format Setting Reference Command Response Command Response NR= i:OK GET=NR g: NR= Note: See "Error list" for any response other than the above. - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 73
WUX6000 User Commands NRMPG MPEG noise reduction Format Setting Reference Command Response Command Response NRMPG= i:OK GET=NRMPG g:NRMPG= Note: See "Error list" for any response other than the above. < MPEG - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 74
WUX6000 User Commands NRMSQT Mosquito noise reduction Format Setting Reference Command Response Command Response NRMSQT= i:OK GET=NRMSQT g:NRMSQT= Note: See "Error list" for any response other than the - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 75
WUX6000 User Commands POWER Power supply control Format Setting Reference Command Response Command Response POWER= i:OK GET= POWER g: POWER = < Power mode parameter:ID > Note: See "Error list" for any response other than the above. < Power control parameter:ID > - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 76
WUX6000 User Commands PRODCODE Product name inquiry Format Setting Reference Command Response Command Response GET= PRODCODE g: PRODCODE=" Note: See "Error list" for any response other than the above. < Product name:Character string > Parameter WUX6000 WUX6000 - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 77
WUX6000 User Commands RC Remote control operation emulate Format Setting Reference Command Response Command Response RC= i:OK - Note: See "Error list" for any response other than the above. < Remote control emulation button parameters:ID > - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 78
WUX6000 User Commands DZOOM_M DZOOM_M+REP VOL_P VOL_P+REP VOL_M VOL_M+REP MUTE FN IMAGE FREEZE BLANK GAMMA SPLIT ECO *-REP DZOOM - VOL + VOL + VOL VOL MUTE FN IMAGE FREEZE BLANK GAMMA SPLIT ECO - Button press start Button press start Button press start Button press end Environment Power mode - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 79
WUX6000 User Commands RGBGAIN RGB gain adjustment Format Setting Reference Command Response Command Response RGBGAIN=,, i:OK GET=RGBGAIN g:RGBGAIN=,, Note: - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 80
WUX6000 User Commands RGBOFFSET RGB offset adjustment Format Setting Reference Command Response Command Response RGBOFFSET=, , i:OK GET=RGBOFFSET g:RGBOFFSET=, , - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 81
WUX6000 User Commands ROMVER Firmware version inquiry Format Setting Reference Command Response Command Response GET=ROMVER g:ROMVER=" Note: See "Error list" for any response other than the above. Environment Power mode restriction LAN RS-232C SL0 SL1 SL3 PM ON - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 82
WUX6000 User Commands SAT Color saturation setting Format Setting Reference Command Response Command Response SAT= i:OK GET=SAT g:SAT= Note: See "Error list" for any response other than the above. Setting values for < - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 83
WUX6000 User Commands SAVEIMGPROF User memory creation/storage/deletion Format Setting Reference Command Response Command Response SAVEIMGPROF= i:OK GET=SAVEIMGPROF g:SAVEIMGPROF=:,,< - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 84
WUX6000 User Commands SCRNASPECT Screen aspect setting Format Setting Reference Command Response Command Response SCRNASPECT= i:OK GET=SCRNASPECT g:SCRNASPECT= Note: See "Error list" for any response other than the above. < - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 85
WUX6000 User Commands SHARP Sharpness setting Format Setting Reference Command Response Command Response SHARP= i:OK GET=SHARP g:SHARP= Note: See "Error list" for any response other than the above. Setting values for - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 86
WUX6000 User Commands SIGMSG Input status display Format Setting Reference Command Response Command Response SIGMSG= i:OK GET=SIGMSG g:SIGMSG= Note: See "Error list" for any response other than the above. < - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 87
WUX6000 User Commands SIGNAL_INFO Displayed signal information inquiry Format Setting Reference Command Response Command Response GET=SIGNAL_INFO g:SIGNAL_INFO=" Note: See "Error list" for any response other than the above. Environment Power mode - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 88
WUX6000 User Commands SIGNALSTATUS Signal detection inquiry Format Setting Reference Command Response Command Response GET=SIGNALSTATUS g:SIGNALSTATUS= Note: See "Error list" for any response other than the above. < Signal status parameter:ID > Parameter Meaning NO_SIGNAL - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 89
WUX6000 User Commands TEMP Temperature sensor value inquiry Format Setting Reference Command Response Command Response GET=TEMP g:TEMP=,,..., Note: See "Error list" for any response other than the above. Environment Power mode restriction - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 90
WUX6000 User Commands TPTN Test pattern Format Setting Reference Command Response Command Response TPTN= i:OK GET=TPTN g:TPTN= Note: See "Error list" for any response other than the above. < Test pattern parameter:ID> Parameter OFF CB1 SSH1 - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 91
(Reference) > GET=TPTN < g:TPTN=OFF Note: '>' indicates a command; ' - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 92
WUX6000 User Commands ZSCLR Zoom Format Setting Reference Command Response Command Response ZSCLR=i=OK GET=ZSCLR g:ZSCLR=- Note: See "Error list" for any response other than the above. Setting values for are -60 - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 93
WUX6000 User Commands 7. Error List Response i:OK e:0002 INVALID_COMMAND e:000A INVALID_PARAMETER Description The command was successfully processed. Reaction The command was invalid (not defined), Use a correct command or correct command or the command format was incorrect. format. Argument ( - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 94
8. Error Processing Start Command/parameter executable during standby? NO YES Command/parameter executable while power mode switched? YES NO Switching power m odes? NO Undefined command? NO Incorrect command format? NO Internal processing in progress? YES YES YES NO Command-specific error - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 95
WUX6000 User Commands 9. Simplified Version for the Manual Command type Power supply Power ON Power OFF Power status inquiry HDMI Digital PC Input Analog PC-1 Analog PC-2 Component LAN USB Input inquiry Standard - Canon REALiS LCOS WUX6000 | WUX6000 Command List - Page 96
Aspect ratio inquiry Lamp mode Lamp mode inquiry Blank Blank inquiry Full power Eco Execute Clear GET=ASPECT LAMP=FULL LAMP=ECO GET=LAMP BLANK=ON BLANK=OFF GET=BLANK WUX6000 User Commands 47h 45h 54h 3Dh 41h 53h 50h 45h 43h 54h 0Dh 4Ch 41h 4Dh 50h 3Dh 46h 55h 4Ch 4Ch
© CANON INC.2014
YT1-1456-000
MULTIMEDIA PROJECTOR
WUX6000
User Commands