Canon REALiS LCOS WUX6000 WUX6000 Command List - Page 7
Communication System Serial, Communication System LAN, Command Format
![]() |
View all Canon REALiS LCOS WUX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
WUX6000 User Commands Communication System (Serial) Item Specifications Communication system RS-232-C Start-stop synchronization half-duplex communication Transmission speed 19.2 Kbps Character length 8 bits / character Stop bit 2 bits Parity None Command format Variable-length records with terminals as delimiters Maximum transmission length Maximum of 256 characters (bytes) including delimiters. Delimiters CR (0Dh) can be used as a delimiter. Command code Delimiter in the response is CR. ASCII codes (20h to 7Eh) Codes other than ASCII codes (20h to 7Eh), delimiter code (0Dh), or NUL (00h) are handled as spaces (20h). Communication procedure No procedure Flow control None Error control None Break signal Not supported Timeout Tc Between characters: 1 s Between command / Tr response interval: 15 s * For timeout, see chapter 3, "Communication Flow" on page 8. Communication System (LAN) Item Communication system Remark Specifications TCP/IP connection. Port: 33336 If a command is not received for 30 seconds, the socket will be closed. Command Format Format Commands are sent from PC to the projector in the following format: or =(value>(delimiter> Character strings consisting of 1 or more alphanumeric letters Character strings consisting of 1 or more alphanumeric letters CR(0Dh) For and , see explanation about each command. Example) When checking the power status (POWER) PC to PJ G E T = P O W E R CR 47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h 0Dh
![](/manual_guide/products/canon-realis-lcos-wux6000-wux6000-command-list-438126e/7.png)