Canon REALiS LCOS WUX6000 WUX6000 Command List - Page 11

WUX6000 User Commands 3. Communication Flow Command Transmission (PC side) Commands should be sent from PC in a way that each character is sent within the specified Tc (inter-character timeout). Command Reception (projector side) The projector retains incoming characters within a specific Tc, and recognizes the data as "received command" when delimiter is received. If the character interval received exceeds the Tc or if a delimiter is not received within 256 characters, all data already received is lost, and the mode is reset to standby to receive commands again. Command/Response A response is always returned within Tr(*) for a command sent from the PC. PC PϓrϩojδecΣtΫorλʔ CoίmϚmϯaυnd WitThriҎn ಺Tr RϨesεpϙonϯsεe (*) The timeout interval between command and response (Tr) is 15 seconds. Response Reception Timeout If a response is not received within the Tr (timeout interval between command and response) while standing by a waiting response after sending a command from the PC, it is deemed to have exceeded the "response reception timeout." Please resend the command. Other To execute commands via the network, the network function must be enabled in advance. Only a portion of the commands can be executed when the projector is in standby mode. The PC side cannot send the next user command before a response for the first command is returned. If two or more user commands are received, user commands from 2nd one are discarded. If 2 or more user commands are received, only the 1st command is processed, and a response is returned when finished. Projector Command 1 Within Tr Command 2 Command 3 Response to Command 1 Discarded Processed Discarded