Canon REALiS LCOS WUX6000 WUX6000 Command List - Page 15
Guide to Command Description
![]() |
View all Canon REALiS LCOS WUX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5. Guide to Command Description This section explains how commands are described. The command descriptions have the format shown below. WUX6000 User Commands EXAMPLE Summary of the function Format Setting Command A command format when a command is sent to the projector to make a setting for the function. "-" is shown when there is no setting command. Response Example) 6AXADJ= A response format for the setting command. "-" is shown when there is no setting command. Reference Command Example) i:OK A command format when a command is sent to the projector to refer to the current setting, status and others for the function. "-" is shown when there is no reference command. Response Example) GET=6AXADJ A response format for a reference command. "-" is shown when there is no reference command. Example) g:6AXADJ= Note: See "Error list" for any response other than the above. When parameters exist for the command, a list of parameter is inserted in this position. Example) Parameter ON Valid OFF Invalid Meaning
![](/manual_guide/products/canon-realis-lcos-wux6000-wux6000-command-list-438126e/15.png)