Canon SELPHY CP-200 Canon Card Photo Printer CP-300/CP-200 User Guide - Page 27

Connecting a Power Source and the Camera to the Printer Connect the camera to the printer using the cable (included with the camera) and turn the printer's power on. For more detailed camera connection instructions, refer to your Camera User Guide. Canon camera compatible with CP-300/CP-200 To DIGITAL Terminal 5 7 To DC IN Terminal 1 46 10 cm (4 in.) or more of open space 2 Compact Power Adapter USB cable included with the camera To Power Outlet Camera's Compact Power Adapter (sold separately or included with the camera) * Please use the camera's compact power adapter or a fully charged battery pack (or charged batteries). 3 To Power Outlet The numbered steps in the following instructions refer to the numbers in the above illustration. 1 Place the printer on a flat area. • Be sure to leave about 10 cm (4 in.) of clearance around the paper-handling slot (at the rear) so that paper has sufficient room to jut out from the slot during printing. 2 Connect the supplied AC cable to the supplied Compact Power Adapter CA-CP100. 26