Canon SELPHY CP-200 Canon Card Photo Printer CP-300/CP-200 User Guide - Page 28

Turning the Printer's Power Off

Get Canon SELPHY CP-200 PDF manuals and user guides View all Canon SELPHY CP-200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

3 Insert the plug in a power outlet. 4 Connect the Compact Power Adapter cable to the printer. • Insert the cable with its mark facing up. • With the CP-200, the power turns on at this point and the indicator lights green. 5 Connect the USB cable to the camera. • Use the USB cable that came with your camera. 6 Connect the USB cable to the printer. • Insert the cable in the left connector, with the mark on the cable facing down. 7 Press the ON/OFF button until the indicator goes on. (CP300 only) • The indicator lights green once the printer powers up. „ Turning the Printer's Power Off CP-300 Press the ON/OFF button until the indicator goes off. CP-200 Unplug the cable of the compact power adapter from the printer. (The indicator will go off) • We recommend that you connect the camera's compact power adapter (sold separately or included with the camera) when using the camera with your printer. If you wish to run the camera on battery power, be sure that batteries are fresh (fully charged). • When connecting the cable, be sure that the connectors on the cable match up correctly with the connectors on the camera and printer. • Use an easily accessible power outlet for the printer's AC cable, so that you can unplug the printer cable quickly in the event of a problem. • Please also refer to the Usage Location section of Proper Usage and Handling for information about printer usage location. p. 14 • Some camera models do not come with a compact power adapter. For details, please see the System Map that came with your camera. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
27
Turning the Printer’s Power Off
CP-300
Press the ON/OFF button until the indicator goes off.
CP-200
Unplug the cable of the compact power adapter from the printer. (The indicator will
go off)
3
Insert the plug in a power outlet.
4
Connect the Compact Power Adapter cable to the printer.
•
Insert the cable
with its
mark facing up
.
•
With the CP-200, the power turns on at this point and the indicator lights green.
5
Connect the USB cable to the camera.
•
Use the USB cable that came with your camera.
6
Connect the USB cable to the printer.
•
Insert the cable in the left connector,
with the
mark on the cable facing
down
.
7
Press the ON/OFF button until the indicator goes on. (CP-
300 only)
•
The indicator lights green once the printer powers up.
•
We recommend that you connect the camera’s compact power adapter (sold
separately or included with the camera) when using the camera with your printer. If
you wish to run the camera on battery power, be sure that batteries are fresh (fully
charged).
•
When connecting the cable, be sure that the connectors on the cable match up
correctly with the connectors on the camera and printer.
•
Use an easily accessible power outlet for the printer’s AC cable, so that you can
unplug the printer cable quickly in the event of a problem.
•
Please also refer to the
Usage Location
section of
Proper Usage and Handling
for
information about printer usage location.
p. 14
•
Some camera models do not come with a compact power adapter. For details,
please see the
System Map
that came with your camera.