Canon SELPHY CP1200 GOLD SELPHY CP1200 Printer User Guide - Page 14

Printing Images (Select & Print) Select images and specify the number of copies as follows. Here, printing from an SD memory card is described as an example, but you can print from other memory cards with the same steps. 1 Turn on SELPHY. zzHold the button until the screen at left is displayed. zzTo turn off SELPHY, hold the button again until the screen changes. 2 Raise the screen (LCD monitor). zzThe screen can be raised up to approximately 45°. Do not attempt to force the screen up more than this amount, as doing so may damage the printer or cause malfunction. Approx. 45° Label side 3 Insert the memory card into the slot. zzInsert the memory card facing as shown until it clicks into place. zzTo remove the card, push it in until it clicks, and then slowly release it. zzThe image display screen used in the next step is displayed (=6). Copies of current image Total prints 4 Choose an image. zzPress the buttons to select an image to print. zzTo jump forward or back by five images, hold down the buttons. 5 Choose the number of copies. zzPress the buttons to specify the number of prints. zzTo increase or decrease the quantity by five copies, hold down the buttons. zzTo print other images at the same time, repeat steps 4 - 5. 6 Print. zzPress the button to start printing. zzWhile printing, paper passes in and out of the back of SELPHY several times. Do not touch the paper until printing is finished and the print is ejected onto the paper cassette. zzDo not allow 19 or more prints to collect in the ejection area on the paper cassette. zzTo cancel printing in progress, always press the button. Cover Contents Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable Troubleshooting Appendix 14