Canon SELPHY CP1200 GOLD SELPHY CP1200 Printer User Guide - Page 44
Enter the password., Check the access point.
View all Canon SELPHY CP1200 GOLD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
8 Enter the password. zzPress the EDIT button to access the input screen, and then enter the password (= 49). zzPress the button. 9 Check the access point. zzOnce the printer is connected to the access point, the screen at left is displayed. Check the indicated access point name and press the button. zzThe screen at left is displayed. • Selecting an unprotected access point in step 7 and pressing the button will display the screen in step 9. • Up to 20 access points are listed. If your desired access point is not listed, press the button and select [Manual Settings] in step 6 on =43 to specify the access point manually. Follow on-screen instructions and enter the SSID, security settings, and the password (=49). • If WEP security is used and you enter the wrong password in step 8, when you press the button and then press the button again after the message, you will go to step 9, but printing is not possible. Check the access point password and try to connect again, starting at step 3. • On SELPHY, wireless signal strength is indicated by the following icons. [ ] High, [ ] Medium, [ ] Low, [ ] Weak, [ ] Out-of-range Cover Contents Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable Troubleshooting Appendix 44