Canon SELPHY CP1200 GOLD SELPHY CP1200 Printer User Guide - Page 39

• Printing in progress cannot be canceled from SELPHY by using the button. Use the camera to stop printing. • You can also connect the printer to a camera via an existing access point. In this case, connect the printer and camera to the same access point. For details on how to connect the printer to an access point, see "Connecting the Printer to the Access Point" (=40). • The printer does not enable communication between the devices connected to it. Subsequent Printing • Once you have completed the connection settings (=37 - 38), the second, standby screen in step 6 is displayed automatically when you turn on the printer. To print, after the standby screen is displayed, simply use the camera as described in steps 5 - 6. • During standby-screen display, you can view the SSID and password by pressing the button. • Even during standby, you can print images on a memory card by inserting the card to access the screen in step 4 on =14. Printing from a Computer Cover Confirming Access Point Compatibility • Before you can print via Wi-Fi from a computer, the computer with the images to send must be connected to an access point. • Use an access point that supports the following Wi-Fi standards. To check the standards your access point supports, refer to the access point user manual. Standards Supported Channels Transmission Methods Security IEEE 802.11b/g 1 - 11 DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g) No security, 64- and 128-bit WEP (open system authentication), WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and WPA2-PSK (AES) Contents Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable Troubleshooting Appendix 39