Canon VIXIA HF21 VIXIA HF21 Instruction Manual - Page 156
Memory Card and Accessories, Connections with External Devices
View all Canon VIXIA HF21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. Activate the microphone attenuator ( 143) or adjust the audio recording level manually ( 81). The picture is displayed correctly but there is no sound from the built-in speaker. - Speaker volume is turned off. Adjust the volume. - If the STV-250N Stereo Video Cable is connected to the camcorder, disconnect it. - The AV terminal is set to headphone output. Set [AV/Headphones] to [AV]. Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the correct direction. Turn the memory card over and insert it. Cannot record on the memory card. - The memory card is full. Delete some recordings ( 58, 98) to free some space or replace the memory card. - Initialize the memory card ( 43) when you use it with the camcorder for the first time. - The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi- tion of the LOCK switch. - A compatible SD/SDHC memory card must be used to be able to record movies on a memory card ( 41). - The folder and file numbers have reached their maximum value. Set [Photo Number- ing] to [Reset] and insert a new memory card. - The simultaneous recording option in the FUNC. menu is set to [Simultaneous Recording Off]. Change the setting to take photos while recording video ( 104). The wireless controller will not work. - Set [Wireless Remote Control] to [On]. - Replace the battery of the wireless controller. Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. Playback looks fine on the camcorder but there is no image on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input. 156 Additional Information