Canon VIXIA HF21 VIXIA HF21 Instruction Manual - Page 161

Do not disconnect the USB cable or the power source until you safely end the connection from the computer. Connect the compact power adapter - When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer's Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder. - To be able to write back scenes and to transfer music files to the camcorder, power the cam- corder using the compact power adapter and only then connect it to the computer using the supplied USB cable. Error writing on the memory card. Data may be recovered if the memory card has not been removed. Attempt recovering the data? - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card. Select [Yes] to try to recover the recordings. If you removed the memory card and used it with another device after this happened, we recommend you select [No]. File name error - The folder and file numbers have reached their maximum value. Set [Photo Number- ing] to [Reset] and delete all the photos on the memory card ( 98) or initialize it ( 43). Initialize only using the camcorder - There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder ( 43). LCD Screen has been dimmed - Hold DISP. pressed for 2 seconds to restore the LCD screen to its normal brightness. May not be possible to record movies on this memory card - You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory card with one rated Speed Class 2, 4 or 6. Mem. Card Number of scenes already at maximum - The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes ( 58) to free some space. Mem. Card Unable to recognize the data - The memory card contains scenes recorded in a different television system (PAL or SECAM). Memory card cover is open - After inserting a memory card, close the memory card slot cover ( 42). Memory card is full - The memory card is full. Delete some recordings ( the memory card. 58, 98) to free some space or replace Additional Information Š 161