Canon WFT-E5A WFT-E5 Instruction Manual - Page 13
Attaching to the Camera
![]() |
UPC - 013803119282
View all Canon WFT-E5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Attaching to the Camera Load a charged battery into the camera. Before attaching the transmitter to the camera, set the camera's power switch to . The transmitter does not have a power switch. It is turned on and off in conjunction with the camera's power switch. Before removing the transmitter, set the camera's power switch to . 1 Remove the terminal cap from the camera. Peel off the terminal cap on the camera bottom to remove. Attach the removed terminal cap to the transmitter's terminal cap holder. 2 Attach the transmitter. As shown in the figure, align the transmitter and the camera, and turn the attachment knob to attach to the camera. 13
![](/manual_guide/products/canon-wireless-transmitter-wfte5a-wfte5-instruction-manual-8c2133d/13.png)
13
Load a charged battery into the camera. Before attaching the transmitter to the camera, set the
camera’s power switch to <
OFF
>. The transmitter does not have a power switch. It is turned on
and off in conjunction with the camera’s power switch.
Before removing the transmitter, set the camera’s power switch to <
OFF
>.
1
Remove the terminal cap from the
camera.
Peel off the terminal cap on the camera bottom to
remove.
Attach the removed terminal cap to the
transmitter’s terminal cap holder.
2
Attach the transmitter.
As shown in the figure, align the transmitter and
the camera, and turn the attachment knob to
attach to the camera.
Attaching to the Camera