Canon WFT-E5A WFT-E5 Instruction Manual - Page 71
Set up the master camera., At this point, switch to setting up the, slave cameras.
![]() |
UPC - 013803119282
View all Canon WFT-E5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Setting Up Linked Shooting 5 Set up the master camera. Configure the settings on the master camera following steps 1-3 on the previous page, and then select [Master]. X The following screen is displayed. 6 At this point, switch to setting up the slave cameras. On the slave cameras, select [OK]. 7 Check the number of slave cameras. X On the master camera LCD monitor, the number of slave cameras detected is displayed. 8 Establish the connection. On the master camera and all slave cameras, select [OK]. X A screen is displayed as the connection is tested. The information you specified is stored on the cameras. It is not stored on the transmitters. 71
![](/manual_guide/products/canon-wireless-transmitter-wfte5a-wfte5-instruction-manual-8c2133d/71.png)
71
Setting Up Linked Shooting
5
Set up the master camera.
Configure the settings on the master camera
following steps 1-3 on the previous page, and then
select [
Master
].
The following screen is displayed.
6
At this point, switch to setting up the
slave cameras.
On the slave cameras, select [
OK
].
7
Check the number of slave cameras.
On the master camera LCD monitor, the number of
slave cameras detected is displayed.
8
Establish the connection.
On the master camera and all slave cameras,
select [
OK
].
A screen is displayed as the connection is tested.
The information you specified is stored on the
cameras. It is not stored on the transmitters.