Canon WFT-E5A WFT-E5 Instruction Manual - Page 29
Configuring Network Settings
UPC - 013803119282
View all Canon WFT-E5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Configuring Network Settings Turn the dial to select how to configure the network settings, and then press . Select [OK] and press to go to the next screen. [Auto setting] Settings otherwise configured with [Manual setting] can be configured automatically. However, the IP address and similar settings must be automatically assigned and configured in environments using DHCP servers or wireless LAN terminals or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned and configured. [Manual setting] The [IP address set.] screen is displayed after you select [Manual setting]. If [Auto setting] results in an error, enter the IP address manually. As the IP address, enter the IP address assigned to the camera. Enter the [IP address], [Subnet mask], [Gateway], and [DNS address] on each screen as they are displayed. If you are not sure what to enter, refer to page 115, "Checking Network Settings," or ask the network administrator or another person knowledgeable about the network. When entering numbers for the IP address, subnet mask, and so on, press to move the input position and turn the dial to enter the number. 29