Canon XF305 Canon XF Utility (Macintosh) Version 1.0 Instruction Manual - Page 18

Playing Back, Searching and Managing Clips Changing the playback position You can change the playback position during playback or in playback pause mode in the following ways. Jump to the previous/next shot mark Shot mark Playback position slider 18 Event mark Skip to the last frame Next frame Previous frame Skip to the first frame Jump to the previous/next event mark Mouse operation Shot Shot Event Event Playback position slider Keyboard shortcut* home (3) end (5 )  arrow  arrow shift (7) +  shift (7) +  2 +  2 +  - - - Action Skip to the first frame of the clip. Skip to the last frame of the clip. Go back one frame. Advance one frame. Jump to the previous shot mark (0 24) in the clip. Jump to the next shot mark in the clip. Jump to the previous event mark (0 24) in the clip. Jump to the next event mark in the clip. Drag it to bring the playback position to the desired frame. Click to jump directly to the selected shot mark. Click to jump directly to the selected event mark. * Only available after clicking on the playback position slider in the preview panel. Changing the clip's thumbnail By default the image used for the thumbnails displayed in the clips panel is the first frame from the clip. However, if you prefer so, you can select a different frame to use as the thumbnail image. 1. In the clips panel, select the clip whose thumbnail you want to change. 2. In the preview panel, pause the playback at the frame you want to use as the thumbnail's image. 3. Click Edit > Set Thumbnail Picture. NOTES • In some cases, the actual frame used for the thumbnail's image may be off by up to 0.5 second from the selected frame.