Canon XL2 Body Kit Instruction Manual - Page 34
Screen Displays during Recording
View all Canon XL2 Body Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Screen Displays during Recording q w e r t y t Recording reminder The camcorder counts from 1 to 10 seconds when you start recording. This is helpful to avoid scenes that are too short. y Center marker Use the center marker to accurately frame subjects ( 35). q Time code You can select between drop frame or non-drop frame time code ( 47). w Remaining tape Indicates the remaining time of the tape in minutes. "b END" flashes when the tape reaches the end. • When the time left is less than 15 seconds, the remaining tape time may not appear. • Depending on the type of the tape, the indication may not be displayed correctly. e Remaining battery charge The battery symbol indicates the charge status of the battery pack. • "k" starts flashing in red when the battery pack is empty. • When you attach an empty battery pack, the power may turn off without displaying "k". • The actual battery charge may not be indicated accurately depending on the condition under which battery pack and camcorder are used. r When "j" flashes "j" flashes in red when the lithium button battery is not installed, or when it needs replacing. i u o u SHUTTER lamp Lights up when the shutter speed is changed from the following: 60i 1/60 of a second 30p 1/30 of a second 24p 1/48 of a second i REC lamp Lights up during recording. The REC lamp starts flashing when the remaining tape is less than 5 minutes (it does not flash when the remaining tape information is not displayed on the screen.) o GAIN lamp Lights up when the AGC (auto gain control) becomes set to -3 dB or +3 dB or higher. 34