Canon XL2 Body Kit Instruction Manual - Page 82

Using the DV Control

Get Canon XL2 Body Kit PDF manuals and user guides View all Canon XL2 Body Kit manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Using the DV Control This feature enables the XL2 to control the record and stop function of a connected IEEE1394 storage/recording device. The device must comply with the IEEE1394 AV/C protocol. Users of Windows XP can also download the DV-PC Recorder from the Canon Homepage to record video/audio to the computer's hard disk. For details, refer to the DV-PC Recorder Software leaflet. ( 26) SYSTEM DV CONTROL•••OFF 1. Open the menu and select [SYSTEM]. Select [DV CONTROL], set it to [ON] and close the menu. 2. Press the start/stop button. When the XL2 is in record pause mode: XL2: Recording Connected device: Recording When the XL2 is recording: XL2: Record pause mode Connected device: Record pause mode When the XL2 is not ready for recording (no cassette loaded etc.) Connected device: Recording/record pause mode After loading a cassette while the connected device is recording: XL2: Recording Connected device: Continues recording Pressing the start/stop button again: XL2: Record pause mode Connected device: Record pause mode ❍ The status of the connected device is indicated as follows: 2 Connected device is recording 3 Connected device is in record pause or stop mode - - - Connected device is in a mode other than record pause or stop [DV CONTROL] is set to [ON], but no DV device is connected ❍ When the XL2 stops recording without operating the start/stop button (e.g. tape has reached the end) while both the XL2 and the connected device are recording, the connected device continues recording. ❍ When connecting two XL2s via a DV cable, make sure to set [DV CONTROL] of the connected device to [OFF]. ❍ Only one device can be connected to the XL2 for DV control. ❍ DV control may not work properly depending on the connected non-Canon device. ❍ The DV control setting is retained by the camcorder even if you turn the power off. Make sure to check the setting after use of the DV control function, as the tape in the connected device may be overwritten. ❍ Do not use a DV cable longer than 14.8 ft. (4.5 m). 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
82
This feature enables the XL2 to control the record and stop function of a connected IEEE1394
storage/recording device. The device must comply with the IEEE1394 AV/C protocol.
Users of Windows XP can also download the DV-PC Recorder from the Canon Homepage to record
video/audio to the computer's hard disk. For details, refer to the
DV-PC Recorder Software
leaflet.
1. Open the menu and select [SYSTEM]. Select [DV CONTROL], set it to [ON] and close the
menu.
2. Press the start/stop button.
When the XL2 is in record pause mode:
XL2: Recording
Connected device: Recording
When the XL2 is recording:
XL2: Record pause mode
Connected device: Record pause mode
When the XL2 is not ready for recording (no cassette loaded etc.)
Connected device: Recording/record pause mode
After loading a cassette while the connected device is recording:
XL2: Recording
Connected device: Continues recording
Pressing the start/stop button again:
XL2: Record pause mode
Connected device: Record pause mode
❍
The status of the connected device is indicated as follows:
2
Connected device is recording
3
Connected device is in record pause or stop mode
– – –
Connected device is in a mode other than record pause or stop
[DV CONTROL] is set to [ON], but no DV device is connected
❍
When the XL2 stops recording without operating the start/stop button (e.g. tape has reached the
end) while both the XL2 and the connected device are recording, the connected device continues
recording.
❍
When connecting two XL2s via a DV cable, make sure to set [DV CONTROL] of the connected
device to [OFF].
❍
Only one device can be connected to the XL2 for DV control.
❍
DV control may not work properly depending on the connected non-Canon device.
❍
The DV control setting is retained by the camcorder even if you turn the power off. Make sure to
check the setting after use of the DV control function, as the tape in the connected device may be
overwritten.
❍
Do not use a DV cable longer than 14.8 ft. (4.5 m).
Using the DV Control
SYSTEM
DV CONTROL•••OFF
(
26)