Canon imageCLASS MF5880dn imageCLASS MF5880dn/5850dn Basic Operation Guide - Page 115

Storing/Editing One-Touch Keys 9 Use - , [numeric keys] and [Tone] to enter the destination's name (16 characters maximum), then press [OK]. Ex. NAME :a John - If you want to specify the following optional settings (, , and ) for the fax number you are registering, go to the next step. - If you do not need to set these options, skip to step 18. For information on how to enter characters, see "Entering Characters," on p. 1-15. - : Normally select this option. - : Select one of these options when you make an international call. If errors occur during fax transmissions, try the setting from through . 14 Press or to select , then press [OK]. OPTIONAL SETTING 2.TX SPEED 15 Press or to select the sending speed (33600bps, 14400bps, 9600bps, or 4800bps), then press [OK]. TX SPEED 33600bps Registering Destinations in the Address Book 10 Press or to select , then press [OK]. 1-TOUCH SPD DIAL 3.OPTIONAL SETTING 11 Press or to select , then press [OK]. OPTIONAL SETTING ON 12 Press or to select , then press [OK]. OPTIONAL SETTING 1.LONG DISTANCE 13 Press or to select the most effective transmission option, then press [OK]. LONG DISTANCE DOMESTIC 5-4 If transmission errors occur frequently, lower the speed. 16 Press or to select , then press [OK]. OPTIONAL SETTING 3.ECM 17 Press or to select to reduce system and line errors while sending to or receiving from other machines that support ECM, then press [OK]. ECM ON To register another one-touch key, repeat the procedure from step 4. 18 Press [Stop/Reset] to return to the standby mode.