Canon imageFORMULA CR-50 CR-50/80 Operation & Maintenance Guide - Page 14
are two scanning glass areas, one on each side. Use
![]() |
View all Canon imageFORMULA CR-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
WARNING Do not use flammable liquids to clean the scanner, including alcohol, benzene, or paint thinner. 3 Spin the rollers while wiping them clean with a firmly wrung cloth dampened with water or a mild detergent. There are 18 roller positions, as shown in the diagram below. Ԧ ԧԥ ԣ Ԥ Ԣ ԡ Ԡ ԙԛ Ԙ Ԛ ԟ Ԝ Ԟ ԝ NOTE • Use cotton swabs to clean the rollers in locations that are too narrow for your fingers, such as a, b, j, n, o, and p. • Rollers in positions b, d, e, k, and p are turned by the roller in position e. Turn the roller in position e to wipe the rollers. • Rollers in positions m and n comprise two rollers each, an upper roller and a lower roller. • Do not force the rollers if they will not turn. In this case, wipe dirt only off of the exposed area. ԧ Ԣ ԙԛ Ԝ 4 Use cotton swabs to clean the entire scanning glass. There are two scanning glass areas, one on each side. Use a cotton swab to wipe dirt from the entire surface of each. Scanning Glass 14
![](/manual_guide/products/canon-imageformula-cr50-cr5080-operation-maintenance-guide-7027b12/14.png)