Canon imageFORMULA CR-50 CR-50/80 Operation & Maintenance Guide - Page 22

5 Gently remove one of the sheets. 6 Adjust the gap between the feeding roller and the separation roller to optimum width. While one sheet remains in place between the rollers, continuously attempt to slide the second sheet (in front of the remaining sheet) to the right, back through the roller gap. Slowly turn the paper thickness adjustment dial clockwise (right) just until the second sheet stops feeding into the gap. Second sheet does not feed into the gap. 8 Confirm that the document feeds properly. See "Confirming Proper Document Feeding" on p. 37 in Instructions. If additional assistance is required, contact your local authorized Canon dealer or service representative. 9 Place a marking label on the unit pointing to the adjustment dial as illustrated below. This will serve as a reference point for future adjustments if required. IMPORTANT Turning the Adjustment Dial clockwise too much may damage the rollers. 7 Remove the sheets from the paper path and close the Maintenance Cover. Marking labels for thickness adjustment dial 22